Basic Info.
Manufacturing Process
Milled Thread
Length
According to Customer′s Requirement
Place of Origin
Fujian, China (Mainland)
Product Name
Miniature Diameter 4mm FF12 Ball Screw
Thread Direction
Left or Right Thread
Pitch
4, 5, 10, 12, 20, 40, 50, 60 mm
Product Description
Introduction
Feature
1.Internal circulation.
2.Space saving, Nimble mss.
3.High position accuracy.
4.1~2mm. Best for fine lead ball screw.
Features
1. High transfer efficiency
Balls with free motion in the ball screw assembly transfer the force and motion between screw and nut. This transfer mode replaces the traditional transfer mode that screw shaft and nut effect directly. Therefore the minimum rolling friction takes place of the sliding friction of traditional screw. The transfer efficiency of ball screw will reach more than 90%. The drive torque of transfer unit reduces to 1/3 of sliding screw. This also reduces the heat release largely.
2. High positioning accuracy
Ball screw has low heat release, small temperature increase and with actions of pre-stretch and eliminating axial clearance in the process, which make ball screw have high positioning accuracy and repeating positioning accuracy.
3. Reversibility
Ball screw has not sticky friction like sliding screw. It clears crawl which may exists during transfer. Ball screw can achieve two transfer modes - from rotary motion to linear motion and from linear motion to rotary motion, and transfer momentum.
4. Long service life
Since the strict control of ball screw groove shapes, surface hardness and material selection, the actual life of ball screw is much longer than sliding screw.
5. Good synchronization
Due to smooth running, axial clearance elimination and consistency in manufacture, several sets of ball screw assembly can drive the same unit or several identical parts to obtain the good synchronization.
Ball Screw Specification
<
| Model No. | Dimensions |
| d | I | Da | D | A | B | L | W | X | H | Q | n | Ca | Coa | K |
| SFU01204-4 | 12 | 4 | 2.5 | 24 | 40 | 10 | 40 | 32 | 4.5 | 30 | | 1×4 | 902 | 1884 | 26 |
| SFU01604-4 | 16 | 4 | 2.381 | 28 | 48 | 10 | 40 | 38 | 5.5 | 40 | M6 | 1×4 | 973 | 2406 | 32 |
| SFU01605-4 | 5 | 3.175 | 28 | 48 | 10 | 50 | 38 | 5.5 | 40 | M6 | 1×4 | 1380 | 3052 | 32 |
| SFU01610-3 | 10 | 3.175 | 28 | 48 | 10 | 57 | 38 | 5.5 | 40 | M6 | 1×3 | 1103 | 2401 | 26 |
| SFU02004-4 | 20 | 4 | 2.381 | 36 | 58 | 10 | 42 | 47 | 6.6 | 44 | M6 | 1×4 | 1066 | 2987 | 38 |
| SFU02005-4 | 5 | 3.175 | 36 | 58 | 10 | 51 | 47 | 6.6 | 44 | M6 | 1×4 | 1551 | 3875 | 39 |
| SFU02504-4 | 25 | 4 | 2.381 | 40 | 62 | 10 | 42 | 51 | 6.6 | 48 | M6 | 1×4 | 1180 | 3795 | 43 |
| SFU02505-4 | 5 | 3.172 | 40 | 62 | 10 | 51 | 51 | 6.6 | 48 | M6 | 1×4 | 1724 | 4904 | 45 |
| SFU02506-4 | 6 | 3.969 | 40 | 62 | 10 | 54 | 51 | 6.6 | 48 | M6 | 1×4 | 2318 | 6057 | 47 |
| SFU02508-4 | 8 | 4.762 | 40 | 62 | 10 | 63 | 51 | 6.6 | 48 | M6 | 1×4 | 2963 | 7313 | 49 |
| SFU02510-4 | 10 | 4.762 | 40 | 62 | 12 | 85 | 51 | 6.6 | 48 | M6 | 1×4 | 2954 | 7295 | 50 |
| SFU03204-4 | 32 | 4 | 2.381 | 50 | 80 | 12 | 44 | 65 | 9 | 62 | M6 | 1×4 | 1296 | 4838 | 51 |
| SFU03205-4 | 5 | 3.175 | 50 | 80 | 12 | 52 | 65 | 9 | 62 | M6 | 1×4 | 1922 | 6343 | 54 |
| SFU03206-4 | 6 | 3.969 | 50 | 80 | 12 | 57 | 65 | 9 | 62 | M6 | 1×4 | 2632 | 7979 | 57 |
| SFU03208-4 | 8 | 4.762 | 50 | 80 | 12 | 65 | 65 | 9 | 62 | M6 | 1×4 | 3387 | 9622 | 60 |
| SFU03210-4 | 10 | 6.35 | 50 | 80 | 12 | 90 | 65 | 9 | 62 | M6 | 1×4 | 4805 | 12208 | 61 |
| SFU04005-4 | 40 | 5 | 3.175 | 63 | 93 | 14 | 55 | 78 | 9 | 70 | M8 | 1×4 | 2110 | 7988 | 63 |
| SFU04006-4 | 6 | 3.969 | 63 | 93 | 14 | 60 | 78 | 9 | 70 | M6 | 1×4 | 2873 | 9913 | 66 |
| SFU04008-4 | 8 | 4.762 | 63 | 93 | 14 | 67 | 78 | 9 | 70 | M6 | 1×4 | 3712 | 11947 | 70 |
| SFU04010-4 | 10 | 6.35 | 63 | 93 | 14 | 93 | 78 | 9 | 70 | M8 | 1×4 | 5399 | 15500 | 73 |
| SFU05010-4 | 50 | 10 | 6.35 | 75 | 110 | 16 | 93 | 93 | 11 | 85 | M8 | 1×4 | 6004 | 19614 | 85 |
| SFU05020-4 | 20 | 7.144 | 75 | 110 | 16 | 138 | 93 | 11 | 85 | M8 | 1×4 | 7142 | 22588 | 94 |
| SFU06310-4 | 63 | 10 | 6.35 | 90 | 125 | 18 | 98 | 108 | 11 | 95 | M8 | 1×4 | 6719 | 25358 | 99 |
| SFU06320-4 | 20 | 9.525 | 95 | 135 | 20 | 149 | 115 | 13.5 | 100 | M8 | 1×4 | 11444 | 36653 | 112 |
| SFU08010-4 | 80 | 10 | 6.35 | 105 | 145 | 20 | 98 | 125 | 13.5 | 110 | M8 | 1×4 | 7346 | 31953 | 109 |
| SFU08020-4 | 20 | 9.525 | 125 | 165 | 25 | 154 | 145 | 13.5 | 130 | M8 | 1×4 | 12911 | 47747 | 138 |
| SFU10020-4 | 100 | 20 | 9.525 | 150 | 202 | 30 | 180 | 170 | 17.5 | 155 | M8 | 1×4 | 14303 | 60698 | 162 |
DRE Ball Screw Application
DRE Ball Screw are widely used in aircraft and missiles to move control surfaces, especially for electric fly by wire, and in automobile power steering to translate rotary motion from an electric motor to axial motion of the steering rack. They are also used in machine tools, robots and precision assembly equipment. High precision ball screws are used in steppers for semiconductor manufacturing.
DRE Customer Reference
TATA
RIVA Group (Italy)
Ramtec Oy (Finland)
Sandvik
HP
Sacmi Filling Spa (Italy)
HMB (Germany)
SAKATO
Elotec (France)
Mega (Turkey)
Tecnomeca-Kidelan (Spain)
SIEMENS
Davis-Standard (USA)
Rotec Industries (USA)
PSL Limited (India)
SHIPPING
Concast Ag (Switzerland)
Transmin (Australia)
Our Service
Winthin 24 hours reply
Professional exporting handling
Professional bearings knowledge
Custom service
OEM service
Stock service
Kinds of payment terms
Technical Supports
Sample available
Warranty:12months
Any shipping method
If you have any question about our products and technical details, please feel free to contact me!
Contact Info:
Fiona He
Export Sales
DRE Engineering Co., Ltd
Tel: 0086-411-84618155
Fax: 0086-411-84633077
Mobile: 0086-18840873965
Web:dreengineering.en.made-in-china.com
Address:
No. 1619 Junan Building, 66 Xi′an Road, Shahekou District, Dalian, Liaoning, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Dalian Running Engineering Company Limited was established in 2007. We supply excellent products and services to every user. We supply kinds of machinery parts to many fields all over the world. We are specialized in slewing bearings, slew drive, gears, medium and large size bearings, precision bearings, linear guides, ball screws, other construction machinery parts and mining machinery. Product range is very wide according to customers′ requirements. We possess very professionally in controlling the quality of our product. Since we have very strong abilities both in design and technical analysis, we can provide our customers with exact, suitable, economic products as well as technical services. We′ve built up good relationships with our customers all over the world, especially in Europe and the USA. Our products are widely used in metallurgy, mining, oil, chemistry, light industry, aviation, harbor/quay, vessels, military industry, instruments and meters, etc.
Our goal is to supply customers high quality, suitable products, professional and prompt services to ensure your machines keep running!
DRE with Reasonable price, Timely delivery, Responsible quality.
DRE- Keep Running!
){kind=link}